AI for property management The phone, the maintenance texts and the rent chasing never stop. Every call answered, every repair sorted.
Every missed call from a tenant or applicant gets a text back, every maintenance request is sorted by urgency and sent to the right contractor, viewing and rent reminders go out on time, and routine replies are drafted from your own templates for a person to approve. Boffin Coders sets it up, with the CRM, on the tools you already use.
- Every missed call answered by text
- Repairs sorted by urgency
- A person approves every reply
- On your own accounts

Why does a property manager's day go on calls, texts and chasing?
Most of the week goes on messages, not on property. Tenants report repairs by text, email and phone, applicants ring about every new listing, contractors need chasing and rent reminders go out by hand. The same replies are typed again every day, and the calls you miss go to voicemail or to the next agent. AI for property management helps most here: answering, sorting, reminding and drafting, so your time goes on inspections, owners and tenants, and a person still decides every reply.
Calls at all hours
Tenants ring about a leak at night and applicants ring while you are at a viewing. You miss half of them, and an applicant who hears nothing books with the next agent.
Maintenance requests in no order
A text, an email, a voicemail and a note on the portal. A dripping tap sits next to a ceiling leak, and nobody can tell which came first or which one is urgent.
Chasing contractors
Who was sent, did they reply, when are they going, is it finished. Each job takes five messages, and the tenant still rings to ask where things are.
Viewings nobody came to
A viewing booked by phone a week ago, with no reminder sent. You drive across town, wait twenty minutes at the door and nobody comes.
Rent reminders typed by hand
Every month the same polite message to the same few tenants, written again from scratch, and sent late in the weeks when everything else is late too.
Contractor invoices typed in
Invoices arrive as PDFs, photos and paper. Someone types each one into the accounts against the right property and job, and checks it was not paid twice.
All of this is fixable, on the tools you already use.
The missed call replies, the maintenance form, the reminders and the CRM are set up on your own accounts, tested with you on real requests, and you see it working before you pay.
What can AI do for a property manager, and what should it not do?
AI is good at the repeated work around managing property: answering a missed call by text, sorting maintenance requests by urgency, sending each job to the right contractor, reminding tenants and applicants, and drafting routine replies from your own templates. It should not choose tenants, judge applicants, decide anything about a person's home or send a reply without a person reading it first. AI for property managers works best as a fast assistant at the front desk, with every decision left to a person. Boffin Coders sets it up on your own accounts.
The phone and the inbox
Missed calls answered, enquiries sorted and viewings booked from your free slots. Work that follows rules your team could write down and happens many times a day.
The repair, start to finish
One form for every request, the job sent to the right contractor, and the tenant told at each step without anyone typing the update.
Decisions about people
Who gets a tenancy, whether an applicant is suitable, what happens when rent is late. Those stay with a person, the same as today.
Sending on its own
No drafted reply reaches a tenant unread. The only messages that go out by themselves are the text back, the reminders and the repair updates, in wording you approved once.
It suits a landlord with a handful of homes as much as a letting agency or a block management team. There is no new software for your team to learn: requests arrive where you already work, and like all our AI automation work, it runs on accounts in your name.
How does property management automation work, step by step?
Property management automation runs the same six steps for every call, text and email. A missed call gets a text within seconds with a link to the right form: report a repair or book a viewing. A repair is sorted by urgency and sent to the contractor you use for that job, and the tenant is told who is coming. Viewing and rent reminders go out on time, a routine reply is drafted for a person to approve, and each morning you get one list. Boffin Coders builds the whole chain on accounts you own.
The drafting step uses a language model, the same kind of AI behind the chat assistants people know, run privately for you. It is given only your own templates, your standard replies and the facts the tenant typed into the form, and it writes a draft in your words. The draft waits in your inbox or your CRM, and nothing is sent until a person has read it and pressed send.
- 1
A call, a repair text, a viewing request
Three ways in, none of them sorted yet
- Missed call 19:05
- Repair text
- Viewing request
- 2
Answered by text in seconds
From your own number, in wording you approved
Sorry we missed your call. To report a repair, use yourfirm.com/repair. To book a viewing, pick a time at yourfirm.com/view
- 3
Sorted by urgency, sent to the contractor
One maintenance form, with a photo
- Problem
- Leaking tap, kitchen
- Property
- Flat 2, 14 Elm Road
- Photo
- Attached
- Urgency
- Within 3 days
- Goes to
- Your plumber
- 4
Viewing and rent reminders sent
From your calendar, in your wording
- Viewing Thursday 17:30
- Reminder the day before
- Rent due on the 1st
- 5
A tenant reply drafted from your templates
Waiting in your inbox, never sent by itself
Thank you for reporting the leak.
A plumber is booked for Wednesday morning, and we will text you when they are on the way.
Waiting for a person to approve
- 6
In the CRM, and one list each morning
Every request, its status and who owns it
Every request answered, nothing sent unread
What happens to a request between the missed call and the repair?
A call you cannot take is answered by text before the tenant or applicant gives up, and by the next morning the request is sorted, sent to a contractor or booked, with a reply waiting for you to approve. The film starts with a phone that never stops and maintenance texts in no order, then follows the steps that replace them: the text back, the maintenance form sorted by urgency, the viewing and rent reminders, the drafted reply a person approves, and the morning list in the CRM. Boffin Coders sets up this same chain for each client.
- A phone that never stops, and maintenance texts in no order.
- Missed calls and applicant enquiries answered by text, and viewings booked.
- One maintenance form, sorted by urgency and sent to the right contractor.
- Viewing reminders and rent reminders, sent on time.
- Routine tenant replies drafted for a person to approve.
- Everything in your CRM, with one list each morning.
Want this on your calls and repairs?
We connect it to your phone, your inbox and the property software you already use, run real requests through it with you and show it working first. Our invoice comes after.
What does AI for property management look like once it is set up?
AI for property management, set up properly, is six connected parts, and you choose the ones you need. Most managers start with missed calls and the maintenance form, because that is where the day goes, then add reminders, contractor invoices, the drafting assistant and, where the old one falls short, a CRM. It sits behind the tools your team already uses, so nobody learns a new screen. Boffin Coders builds and connects each part on accounts in your name.
Missed calls answered by text
Every tenant or applicant you cannot take gets a text within seconds, with a link to report a repair or book a viewing from your free slots. It runs on your existing number, and the detail is on our missed call text back page.
One maintenance form
A photo, where it is in the property and how urgent it is. Each request is sorted, sent to the right contractor and the tenant kept updated. Emergencies alert whoever is on call.
Viewing, inspection and rent reminders
Applicants confirm or move a viewing with one tap, tenants hear before an inspection, and rent reminders go out in your wording. More on text reminders before each booking.
Contractor invoices into the accounts
Each invoice is read as it arrives, matched to the property and the job, and entered into your accounts after one click, with the original attached. The detail is on reading invoices into your accounts.
A private assistant for tenant replies
It drafts routine replies from your own templates: repair updates, viewing details and what happens next. A person reads, edits and approves each one before it is sent.
A CRM, or the software you have
Every enquiry, request, contractor and tenant in one place, or the property software you already use connected to the parts above, so nothing is typed twice.
If you also sell homes, the enquiries from your own website can go the same way: see how we build websites for estate and letting agencies that write each enquiry into the CRM.
How is each maintenance request sorted and sent to the right contractor?
Every repair arrives through one short form, whether the tenant found the link in a text after a missed call, in an email or in their move-in pack. The form asks what your team asks on the phone today: what is wrong, where it is in the property, a photo and how bad it is. The answers decide what happens next. The urgency sets how fast, the kind of job picks the contractor from your list, and every step is saved in your CRM. Boffin Coders writes the questions and the rules with you.
What is wrong, with a photo
The tenant picks the kind of problem, says where it is and adds a photo from their phone. The contractor sees the job before they set off, so they can bring the right part.
How urgent it is
A leak, no heating or a door that will not lock goes to the top and alerts whoever is on call, by text and a phone call. You decide what counts as an emergency. Everything else joins the morning list.
The right contractor
The job goes to the plumber, electrician or handyman you use for that kind of work and that area, with the photo, the address and the tenant's access times. Your team sends it with one tap, or changes it first.
The tenant kept updated
Received, contractor booked, on the way, done. Each update goes out in wording you approved once, so nobody rings the office to ask where things are.
The form takes about two minutes on a phone and shows your emergency number at the top. If you already pay for maintenance request software, the form can feed it instead, and the contractor and tenant updates run from there.
What does the AI assistant draft, and who approves it?
The assistant we set up is a drafting aid that works only from your own templates, standard replies and the past messages you choose to give it. It writes repair updates that need more than a fixed line, answers to the questions applicants ask every week, viewing confirmations and routine tenant replies in your tone, and leaves each one as a draft. A person reads it, changes what needs changing and sends it. It decides nothing about a tenancy and sends nothing by itself. Boffin Coders sets it up inside your own accounts.
Your templates, your words
It writes from the messages you already send, so a draft reads like you. Your messages are looked up when it drafts, and never used to train a model.
A draft, never a send
Every draft waits in your inbox or your CRM. The assistant has no way to send it, so nothing reaches a tenant, an applicant or an owner unread.
A person approves
Whoever owns the property or the request reads each draft, edits it and sends it. The facts the tenant typed sit beside the draft, so checking it is quick.
Routine replies only
Repair updates, viewing details, what to expect on move-in day and the questions applicants ask every week. Anything about a tenancy, a dispute or a person's money stays with you.
We run our own sales email the same way: the model writes each email into an editor and has no way to send it, and a person reads every one before it goes. The assistant on this website answers only from our own pages, the same pattern pointed at your templates.
Where does a property management CRM fit in?
The CRM is where every enquiry, request and job should end up. When requests live in personal phones and inboxes, nobody can see what was answered or which contractor is running late. A property management CRM keeps every applicant, tenant, property, request and contractor in one place, with who owns each one and what happens next. Boffin Coders sets one up for you, or connects the property software you already use so the parts above write straight into it.
A CRM your team opens
Every enquiry, where it came from, who owns it and what happens next. Set up in a CRM you already pay for, or a simple one chosen with you.
Connected to your property software
Tenancies, properties and owners stay in the property management software you already use. New requests and enquiries are written into it, where it lets other software add to it.
Every property, every job
Open a property and see its open repairs, the contractor on each one, the last inspection and the messages sent, without searching three inboxes.
One list each morning
One email at the start of the day: new enquiries, urgent repairs, viewings booked, drafts waiting for approval, and anything nobody has answered yet.
Does it suit a landlord as well as a letting agency?
Yes, and the parts that matter most change with the portfolio. A landlord managing their own homes loses most to calls they cannot take. A letting agent or property manager loses time to repairs in no order and contractors who need chasing. A block or HOA manager needs one place for requests from many residents. AI property management set up this way is the same chain in each case, sized to how you work. Boffin Coders starts with the part that costs you the most time.
A landlord with a portfolio
You answer your own phone between everything else. Every tenant hears back within seconds, and repairs arrive sorted, with a photo, for when you have a moment.
A letting agent
Applicants ring about every new listing and tenants text about repairs. Applicants book viewings from your free slots, and each repair reaches the right contractor.
A property manager
Many homes, many owners and a long contractor list. Every request has an owner, every job a status, and owners get a short update you approve.
A block or HOA manager
Requests from many residents about the same shared areas. Each one is logged once, reports of the same problem are grouped for your check, and residents hear what is happening.
What do you need to get this running?
You need the phone number tenants and applicants call, the inbox requests land in, your calendar, your contractor list and a handful of the replies you send most. Boffin Coders sets up the missed call replies and the maintenance form first, because that is where the day goes, then the reminders, the CRM, contractor invoices and the drafting assistant, and runs real requests through each part with you before it goes live. The first parts are usually running within one to two weeks, and you can switch any of it off at any time.
A 20-minute call
How calls, repairs and enquiries reach you today, the contractors you use, and where the hours go.
Missed calls and the form
The text back on your existing number and one maintenance form, with your questions, your urgency levels and your contractor list.
Reminders
Viewing and inspection times from your calendar, and rent reminders in your own wording.
The drafting assistant
Your templates and standard replies loaded, and its drafts checked against what your team would send.
Tested together
Real requests run through every part with you, and it goes live when you are happy. Our invoice comes after.
What you need, in plain words: access to your phone account and the inbox requests reach, your calendar, your contractor list and the templates you are happy for the assistant to use. There is nothing to install on your computers, and your tenants change nothing, except that they now hear back.
How are tenant and owner details kept private?
Tenant and owner details are the first thing a manager asks about, and the setup is built around them. Everything runs on accounts in your own name, the work is covered by a confidentiality agreement signed before it starts, and your tenants' details and your messages are never used to train a model. A person approves every message the system writes: fixed wording such as the text back and the reminders is approved once, and every drafted reply is read by a person before it goes. Boffin Coders builds it this way for every client.
Your own accounts
The phone service, the AI service, the CRM and the storage are opened in your name. You can see, change or close every one.
A confidentiality agreement
Signed before we see a single request, on your paper if you have one, and covering everyone at Boffin Coders who works on the setup.
Never used to train a model
The AI service runs under terms that keep your data out of model training, and the assistant looks up your templates only when it drafts.
A person approves what is sent
The text back, the reminders and the repair updates use wording you approve once. Contractor jobs go out with one tap from your team, and every drafted reply is read and sent by a person.
Stored where you choose
Requests, photos and drafts are stored in the region you choose, in your own cloud account, or on a server you own.
Access you control
You decide who on your team sees which properties and requests, and you can remove anyone's access, ours included, at any time.
Resell these systems to your clients
Your agency can resell these systems to its own clients. Boffin Coders does the setup on each client's own accounts, under your agency's name, and never contacts your client unless you ask. You see the work running before you pay, and we sign a confidentiality agreement before we start. It is part of our white-label AI work, on the same terms as our web, app, design and SEO work. What you charge your client is your call.
Under your name
You sell, present and hand over the work as your agency's own. Our name is not on anything your client sees.
On your client's own accounts
Every account the work runs on is opened in your client's name, such as their phone number, calendar or accounting tool, so your client owns each one and you can see them all.
We never contact your client
We work through you and never contact your client unless you ask. A confidentiality agreement is signed before any work starts.
You see it working before you pay
We set up and test on your client's accounts first. You see the work running, then we invoice, never up front.
Before you set this up
What landlords, letting agents and property managers ask before they connect their phone, their inbox and their contractor list.
No. AI takes the repeated work: answering missed calls and enquiries by text, sorting maintenance requests, updating tenants and contractors, and typing the same replies. Inspections, judgement calls, choosing tenants and the relationships with tenants and owners stay with people. Set up well, it gives a property manager back the hours that went on the phone.
Not answered here?
Want every call answered and every repair sorted?
Twenty minutes with the person who would set it up. Bring how calls and repairs reach you today, the size of your portfolio and the tools you use. You leave knowing which parts would help first, and what a setup for you involves.