Skip to main content

Invoice processing automation No more evenings typing invoices. Nobody retyping them into the accounts.

Each supplier invoice is read the moment it arrives, by email, upload or a photo from a phone. The figures are checked, the right person approves it in one click, and the bill goes into your accounts with the PDF attached.

  • By email, upload or phone photo
  • Into the accounts you already use
  • A person checks anything unclear
  • On your own cloud or server
The pile on the desk

Why does entering invoices still take a whole evening?

Most invoices still reach the accounts the slow way. Someone opens each email or picks up each sheet of paper, reads the supplier, the number, the dates and the total, and types them in, line by line. It is careful work, so it waits for a quiet hour, and the quiet hour is usually an evening or the last days of the month. Invoice processing automation reads each invoice for you, checks it and enters it, and a person looks only at the few that need a decision.

The evening spent typing invoices

Month end comes round and there is a pile to enter. Supplier, invoice number, date, net, tax, total, then the next one. It gets done at the kitchen table, after the day's real work has finished.

One typo, or the same bill paid twice

A 7 typed as a 1, or an invoice that came by email and again by post and went in both times. Nobody notices until the supplier's statement does not match, or the money has already gone.

Invoices spread across inboxes, paper and photos

Some come to your inbox, some to a colleague's, some by post, and some as a photo sent from the van. Before anything is entered, someone has to find them all.

Approvals waiting on one person

An invoice needs a yes before it is paid, and the person who says yes is out on site or on leave. It sits in an email thread until the supplier rings to ask where the money is.

Skilled people doing data entry

Your bookkeeper or office manager knows the business well. Every hour spent copying figures off a PDF is an hour not spent on cash flow, suppliers or the questions only they can answer.

Nobody sure what is due this week

When invoices go in as a batch at month end, the list of what you owe is always a few weeks old. Ask what is due on Friday and someone has to go and look.

All of this is fixable, with the accounts you already keep.

Invoice processing automation is set up on your own email and accounting tool, tested on your real invoices with you, and you see it working before you pay.

The short answer

What is invoice processing automation?

Invoice processing automation reads each supplier invoice as it arrives, by email, upload or a photo from a phone, and pulls out the supplier, the invoice number, the dates, the totals, the tax and the lines. It checks that the figures add up and that the invoice has not been seen before, sends it to the right person to approve, then enters it into your accounting tool with the PDF attached. Anything unclear goes to a person. Boffin Coders sets it up on your own accounts.

Read once, never retyped

Each invoice is read the moment it arrives, whatever the layout. The figures go into your accounts as they appear on the page, so nobody copies them by hand.

Checked before it is entered

The lines are added up, the tax is checked against the net, and the invoice number is compared with every invoice already in. A mistake is caught before it reaches the books.

A person where a decision is needed

When something is unclear, such as a blurred total or a supplier it has not seen before, the invoice goes to a person with the question marked. Nothing is guessed.

It is for owners who keep their own books, for the bookkeepers and office managers who keep them for the business, and for accounting and bookkeeping firms that handle invoices for many clients, where each client gets its own address and its own rules. There is no new software for your team to learn. Like our text appointment reminders, it runs on accounts in your name, and you can open every one of them.

How it works

Every invoice read and checked. Nobody types it in.

Each invoice that arrives starts six steps that run without anyone typing. It is read, checked against your rules and the invoices already in, approved by the right person in one click, and entered into your accounting tool with the original attached. Once a week you get one list of what is due, what is paid and what is waiting. Boffin Coders builds the whole chain on accounts you own.

The reading step uses OCR, short for optical character recognition: software that turns the picture of a page into text a computer can work with. A language model then reads that text the way a person would, and works out which number is the total and which is the tax, whatever the supplier's layout. Every figure it pulls out is kept beside the spot on the page it came from, so whoever checks an invoice sees both at once.

invoice · INV-1042arrived by email
  1. 1

    Invoices arrive

    A dedicated email address, an upload, or a photo from a phone

    • invoices@yourbusiness.com
    • Upload
    • Phone photo
  2. 2

    The details are read off the page

    Supplier, number, dates, totals, tax and lines

    Supplier
    Your Supplier Ltd
    Invoice no.
    INV-1042
    Due
    in 30 days
    Net
    1,250.00
    Tax
    250.00
    Total
    1,500.00
  3. 3

    Checked before anything is entered

    Your rules, and every invoice already in

    • Passed:Totals add up
    • Passed:Not seen before
    • Passed:Matches order PO-318
    • Sent to a person:Line 3 uncleara person checks it
  4. 4

    Approved in one click

    The right person, by email or on their phone

  5. 5

    Entered into your accounts

    As a bill, with the original PDF attached

    • Xero
    • QuickBooks
    • Sage
    • A spreadsheet
  6. 6

    A weekly list

    What is due, what is paid, what is waiting

    Every invoice entered, nobody typing

Illustration. The supplier, the invoice and the figures are invented.
The film

What happens to an invoice between the inbox and the accounts?

An invoice that arrives by email is read, checked and waiting for approval before anyone opens it, and once approved it appears in your accounts without anyone typing it. The film starts with an evening of typing invoices and a bill paid twice, then follows the steps that replace that evening: the invoice arriving, the details read off the page, the checks for totals and duplicates, the one-click approval, and the entry in your accounts with a weekly list of what is due. Boffin Coders builds this same chain for every business it sets up.

  • An evening of typing invoices into the accounts, and a duplicate that was paid twice.
  • Invoices arrive by email to their own address, by upload, or as a photo from a phone.
  • The supplier, the number, the dates, the totals, the tax and the lines are read off each invoice.
  • The totals and duplicates are checked, and anything unclear goes to a person.
  • The right person approves each invoice in one click.
  • It is entered into the accounts with the PDF attached, and a weekly list shows what is due.
How invoice processing automation works · 2:34 · Voice-over in English.

Want this on your invoices?

We connect it to your inbox and your accounting tool, run your own invoices through it with you and show it working first. Our invoice comes after.

Reading each invoice

What does invoice OCR read off each invoice?

Invoice OCR turns the page into text, and the reading step then picks out the details your accounts need. This invoice data extraction works on a PDF from a supplier's system, a scan from the office printer or a photo taken on a phone, and on layouts it has never seen. Every invoice gives the same fields in the same order, ready to check. Boffin Coders sets the list of fields with you, so it matches what your bookkeeper enters today.

Who

The supplier and the number

The supplier's name, matched to the supplier already in your accounts, and the invoice number exactly as printed, letters and dashes included.

When

The dates and the terms

The invoice date and the due date or the payment terms, so a due date is worked out even when the invoice only says "30 days".

How much

The totals and the tax

The net amount, the tax, the total and the currency, each kept apart, so the tax lands on the right line in your accounts.

What for

The lines

Each line with its description, quantity and price, where you want that detail, for example to match a purchase order or to cost work to a job.

Invoice scanning from paper works best from a flat, well-lit page, and a phone photo is fine for that. Handwritten notes, a stamp across the total or a faded till receipt are harder to read. Those invoices go to a person with the doubtful fields marked, and nothing is filled in by a guess.

Checks and approvals

What happens when an invoice looks wrong or unclear?

Every invoice passes the same checks before it goes near your accounts, set up once to your rules. The lines must add up to the net, the tax must match the net, and the invoice number must be new for that supplier. Where you use purchase orders, the invoice is matched to its order. An invoice that fails a check, or that the system is unsure about, goes to a person with the reason written on it. Boffin Coders writes these rules with you before anything goes live.

Totals

The sums add up

The lines add up to the net, and the net plus the tax makes the total. If they do not, the invoice stops and the difference is shown.

Duplicates

The same bill, entered once

The same supplier and invoice number, or the same amount on the same date, is flagged before entry. An invoice sent by email and again by post goes in once.

Orders

Matched to the order

Where you raise purchase orders, each invoice is matched to its order and its quantities. A price that differs from the order is shown to the person who approves.

Unclear

A person decides

A blurred figure, a new supplier or a total above a limit you set goes to a person, with the question marked. The system never guesses a number.

AI invoice processing helps most with the reading: messy layouts, scans and invoices from suppliers it has never seen. The decisions stay with people. A person approves every payment, and anything the system is unsure about is shown to a person first. All our AI automation work runs this way: the model reads and sorts, and a person keeps every decision that cannot be undone.

Your accounts

Where do invoices end up once they are approved?

Every approved invoice ends up in the accounting tool you already use, as a bill against the right supplier, with the original PDF attached. Boffin Coders connects Xero, QuickBooks, Sage or the accounting system you run, or a spreadsheet if that is how your books are kept today. Your bookkeeper keeps working in the tool they know, and the approvals and the weekly list arrive by email, so there is no new screen to check.

In your accounting tool

A bill against the right supplier, with the dates, the amounts and the tax on the right lines, ready to pay the way you pay today.

With the original attached

The PDF or the photo sits on the bill itself, so you or your accountant can open the original from the entry in one click.

With a record of who approved it

Each approval is kept with the name and the time, so nobody has to search an email thread to see who said yes.

On the weekly list

One email a week: what is due and when, what was paid, and what is waiting for an approval or a person's check.

Getting it running

What do you need to get invoices read for you?

You need the email address your invoices arrive at today and the accounting tool you keep your books in. Boffin Coders sets up a dedicated address for invoices, connects the reading step to your accounts, writes the checks and the approval rules with you, then runs a batch of your real invoices through it before it goes live. Most businesses are ready within one to two weeks, and you can switch it off at any time.

  1. A 20-minute call

    How invoices reach you today, the accounting tool you use, who approves what and the mistakes you want to stop.

  2. One address for invoices

    A dedicated email address suppliers send to, plus an upload page and a phone photo route for paper. Your old addresses can forward to it.

  3. Reading set to your fields

    The fields your bookkeeper enters today, read from a sample of your own invoices and checked against what was typed by hand.

  4. Checks and approvals

    The duplicate and total checks, your purchase order rules, and who approves which supplier or amount.

  5. Tested together

    We run your real invoices through it with you, check every entry and go live when you are happy. Our invoice comes after.

What you need, in plain words: a login for your accounting tool, access to the inbox where invoices land today, and a list of who approves what. There is nothing to install on your computers, and your suppliers change nothing, except the address they send to if you want them to.

The tools behind it

Which tools does it run on, and who owns them?

Invoice processing automation runs on a handful of well-known services, each opened in your name. Boffin Coders sets them up and connects them, and you can see and change every account. The cards below explain what each one does in plain words, so nothing on a bill or a setup call comes as a surprise.

Email: the invoice address

A dedicated address on your own domain, in Google Workspace or Microsoft 365, that suppliers send invoices to. Every attachment that arrives there is picked up for reading.

The reader: invoice data extraction

OCR and a language model that pull the fields off each page. They run in your own cloud account or on your server, and your invoices are never used to train a model.

The rules: checks you can read

The total, duplicate, order and limit checks are written down in plain words with you, so you can see why an invoice stopped and change a rule later.

The approval: one click

The person who approves gets the invoice and its details by email or on their phone, with buttons to approve or query it. No login, no new app.

Your accounting tool's API: the books

An API is the door other software uses to add to your books. Xero, QuickBooks and Sage each have one, so each bill arrives without anyone typing it in.

Your data: where it lives

Invoices and their details are stored in your region, in accounts that belong to you. Only your team can see them, and nothing is shared or sold.

Built in or set up for you

Would the invoice automation in your accounting tool do the job?

Many accounting tools now read invoices sent to a special address, and if yours does what you need, Boffin Coders will say so on the first call. Built-in invoice automation suits one business, invoices that arrive as PDFs by email and a plain upload into the books. When you want duplicate and order checks, approvals by amount, paper and phone photos, many clients kept apart, or the reading done on your own server, we set up and connect the tools for you, or build the parts no ready-made tool covers.

When the built-in reader is enough

One business, invoices mostly as PDFs by email, one person who checks and approves everything, and no purchase orders. Switch on the reader your accounting tool already has. If that is you, we will tell you.

When we set it up or build it

Several approvers or sites, purchase orders to match, a lot of paper or phone photos, a bookkeeping firm handling many clients, or invoices that must stay on your own server. We build those parts in your accounts, with the code yours.

For agencies

Resell invoice processing automation to your clients

Your agency can resell invoice processing automation to its own clients. Boffin Coders does the setup on each client's own accounts, under your agency's name, and never contacts your client unless you ask. You see the work running before you pay, and we sign a confidentiality agreement before we start. It is part of our white-label AI work, on the same terms as our web, app, design and SEO work. What you charge your client is your call.

Under your name

You sell, present and hand over the work as your agency's own. Our name is not on anything your client sees.

On your client's own accounts

Every account the work runs on is opened in your client's name, such as their phone number, calendar or accounting tool, so your client owns each one and you can see them all.

We never contact your client

We work through you and never contact your client unless you ask. A confidentiality agreement is signed before any work starts.

You see it working before you pay

We set up and test on your client's accounts first. You see the work running, then we invoice, never up front.

FAQ

Before you hand over your invoices

What owners, bookkeepers and accounting firms ask before they connect their inbox and their accounts.

Send every invoice to one email address, have the details read off each one, check the totals and duplicates, route it to the right person for approval and enter it into your accounting software with the original attached. Invoice processing automation does those steps for you, and a person checks anything the system is unsure about.

Not answered here?

Want your invoices read and entered for you?

Twenty minutes with the person who would set it up. Bring how invoices reach you today, the accounting tool you use and who approves what. You leave knowing whether the reader in your accounting tool would do, or what a setup for your business involves.